Pneumatic leak sealing systems for hazmat incidents and industrial emergencies. Authorised Vetter distributor for Africa, the Middle East and Gulf.
Vetter (Germany) manufactures the world-leading range of pneumatic leak sealing equipment for hazmat incidents — from pipe plugs and sealing bags to pipe repair systems for pipelines, tanks, and rail wagons. Africa for Import and Export LLC-FZ is the authorised distributor for Africa, the Middle East and Gulf.
Inflatable pneumatic bags for sealing pipes, culverts, sewers, and drains during chemical spill response. Available in standard and chemical-resistant variants for a wide range of pipe diameters. Rapid deployment — minutes from kit to sealed pipe.
| Application | Pipe sealing, spill containment, drain blocking |
| Variants | Standard and chemical-resistant rubber |
| Size range | Multiple diameters — contact us for specification |
Pre-configured leak sealing sets combining pipe plugs, sealing bags, patches, and control units in ready-to-deploy kit form. Used by industrial fire brigades, port emergency teams, and civil defense units for rapid hazmat containment.
| Contents | Plugs, sealing bags, patches, control unit, gauges |
| Application | Tank leaks, pipeline incidents, chemical spills |
| Users | Industrial fire brigades, civil defense, port teams |
Vetter mini leak sealing bags are designed for pipe diameters below 150mm and confined-access leak points where standard bags cannot reach. Inflated with compressed air or nitrogen from a standard control unit, they form an immediate pressure seal against chemicals, fuels, or gases. Essential component of rapid-deployment hazmat kits.
| Pipe diameter | Small diameters — below 150mm typical range |
| Inflation medium | Compressed air or nitrogen |
| Material | Chemical-resistant rubber (natural or neoprene) |
| Best for | Tight-access leaks, fittings, small-bore pipework |
The Vetter high pressure leak sealing system handles emergency interventions on live pressurised pipelines where standard pneumatic bags would fail under line pressure. Comprising heavy-duty sealing bags, pipe clamps, and a dedicated high-pressure control unit, this system is rated for use on industrial oil, gas, and chemical pipelines and is standard equipment for oil and gas operators, port terminals, and industrial fire brigades.
| Application | Pressurised pipelines, industrial vessels |
| Media | Hydrocarbons, chemicals, gas |
| System includes | Sealing bags, pipe clamps, high-pressure control unit |
| Best for | Oil & gas, petrochemical, port terminal incidents |
Vetter pneumatic containers are inflatable, chemically resistant vessels that function as portable secondary containment at hazmat incidents. Deployed beneath leaking tanks, road tankers, or pipelines, they capture runoff and prevent soil and groundwater contamination. Available in multiple capacities and compatible with Vetter suction lances and transfer systems for full drain-and-contain operations.
| Function | Secondary containment, spill capture, product transfer |
| Material | Chemical-resistant fabric |
| Capacity | Multiple sizes — contact for specification |
| Best for | Port HazMat teams, environmental response, civil defense |
The Vetter tank leak sealing and drainage system addresses road tanker, rail wagon, and fixed storage tank incidents where plugging alone is insufficient. External sealing bags stop the immediate leak while suction lances and transfer hoses drain remaining hazardous product to a safe container simultaneously. This dual-action approach is mandatory procedure for many civil defense and industrial fire brigade emergency response protocols.
| System includes | External sealing bags, suction lance, transfer hoses, control unit |
| Application | Road tankers, rail wagons, fixed storage tanks |
| Operation | Simultaneous seal + drain |
| Best for | Civil defense, industrial fire brigades, petrochemical sites |
Supply to civil defense forces, fire departments, environmental response teams, and industrial emergency services across Egypt, the GCC, and sub-Saharan Africa. Full technical documentation and operator training available.
Vetter manufactures several distinct leak sealing product families. The right choice depends on the leak location, pipe diameter, operating pressure, and the nature of the chemical or substance involved. Use the table below as a starting guide, then contact us for exact model specifications.
| System | Leak Location | Pipe / Vessel Size | Pressure Rating | Best For |
|---|---|---|---|---|
| Pneumatic Pipe Plugging Bags | Inside pipe / culvert | 150mm–1200mm+ | Low to medium | Drain/sewer sealing, spill containment |
| Mini Leak Sealing Bags | Inside pipe / fitting | Below 150mm | Low to medium | Small-bore pipes, fittings, tight access |
| High Pressure Leak Sealing System | Pressurised pipeline / vessel | Any | High pressure | Oil & gas, petrochemical, live pipelines |
| Pneumatic Containers | Below leaking vessel (external) | Vessel / tanker | N/A (containment) | Secondary containment, spill capture |
| Tank Leak Sealing & Drainage System | Tank / tanker surface (external) | Road tanker / rail wagon | Low to medium | Seal + drain simultaneously |
| Hazmat Leak Sealing Sets | Multiple scenarios | Various | Low to medium | Industrial fire brigades, rapid response |
Pressurised hydrocarbon pipelines require the Vetter high pressure leak sealing system. Standard plugging bags cannot withstand line pressure — high-pressure rated bags and clamps are used to establish a temporary seal while the line is depressurised for permanent repair.
Road tanker rollover or collision incidents require the tank leak sealing and drainage system. External sealing bags stop the leak while suction lances and transfer hoses transfer product to a recovery vehicle. Pneumatic containers provide secondary spill containment beneath the tanker.
Port HazMat teams and refinery emergency response units use Vetter pneumatic containers for secondary containment of chemical spills, combined with pipe plugging bags to seal storm drains and prevent contaminated runoff reaching the marine environment.
Rail chemical wagon leaks present access challenges that Vetter mini leak sealing bags and external sealing bags address. The tank drainage system allows simultaneous sealing and transfer of hazardous product from the rail wagon to recovery containers on-site.
Industrial fire brigades at chemical plants, petrochemical complexes, and manufacturing facilities deploy complete Vetter hazmat sealing sets for rapid intervention on plant piping leaks, valve failures, and vessel breaches during unplanned shutdowns.
Civil defense forces across Africa and the Gulf equip specialist HazMat units with Vetter pneumatic pipe plugging bags to seal municipal sewer and drain networks during chemical spill incidents, preventing contamination from entering waterways or populated areas.
Vetter mini leak sealing bags are compact pneumatic sealing devices for pipe diameters below 150mm and tight-access leak points where standard bags cannot fit. Inflated with compressed air or nitrogen, they form an immediate pressure seal against chemicals, fuels, or gases. They are essential components in rapid-intervention hazmat kits for fire brigades and industrial emergency teams.
The Vetter high pressure leak sealing system is used for emergency containment of pressurised pipelines carrying oil, gas, or chemicals — situations where standard pneumatic bags would fail under line pressure. Heavy-duty sealing bags and pipe clamps rated for high-pressure service are deployed with a dedicated control unit. It is standard equipment for oil and gas operators, pipeline companies, and industrial fire brigades.
Vetter pneumatic containers are inflatable, chemically resistant vessels that act as portable secondary containment at hazmat incidents. Positioned beneath leaking tanks or pipelines, they capture spilled product and prevent environmental contamination. They are compatible with Vetter suction lances for complete drain-and-contain operations. Port emergency teams and environmental response units across Africa and the Gulf use them as standard equipment.
The system applies external pneumatic sealing bags to the outer surface of a leaking tank or road tanker to stop immediate product loss. Simultaneously, a suction lance is inserted through a separate opening and connected via transfer hoses to a recovery container. This dual-action approach seals the leak and transfers remaining hazardous product in one coordinated operation — the standard approach for road tanker and rail wagon HazMat incidents.
A Vetter leak sealer (external sealing bag) is applied to the outside of a leaking vessel or pipe and conforms to irregular surfaces without requiring pipe entry. A pipe plug (pneumatic pipe plugging bag) is inserted inside a pipe and inflated to block flow from within. External sealers are used where the leak is on a vessel wall or where pipe entry is not possible. Pipe plugs are used when sealing a pipe end, culvert, or drain. The choice depends on access, pipe geometry, and incident type.
Yes. Africa for Import and Export LLC-FZ is the authorised distributor for the full Vetter hazmat leak sealing range across Africa, the Middle East, and the Gulf. We supply civil defense forces, industrial fire brigades, port emergency teams, oil and gas operators, and environmental response units. Contact us for technical specifications, pricing, and delivery timelines for any Vetter product.
Contact us for pricing, technical specifications, and delivery timelines.
Request A Quote